Metal Sealed Differential Case with Steel Cog Differential Gear for 1/10 2WD Slash 2WD Stampede Rustler Bandit

Feature:The Sealed Differential Case Compatible with 1/10 2WD Bandit Electric, Rustler VXL Velineon Brushless, Rustler XL-5, Slash 2WD all versions, Stampede Electric, Stampede VXL, Stampede XL-5.The Differential Case is made of aluminum, main differential gear is made of high quality Steel metal.With O-Rings help seal against fluid leakage which results in a very smooth differential that improves the performance of your vehicleIt will help to allows you to tune to current track conditions by changing the weight of the differential oil.Main Gear Outside diameter: 32.5mm (1.28inch)The center holw for Shaft diameter: 5mm (0.2inch)Overall thickness: 21mm (0.83inch)Note: This does not come with internal spider gears and output shaftsPackage included:1Kit differential Case (2 halves)1Pcs steel main gear2Pcs Large o-ring2Pcs small o-ring1Pcs hardware packHow to install,and avoid leaks- Build it dry first and check the diff action- Use team associated green slime on all the o-rings. Make sure the o-rings are seated correctly before sealing things up.- Don’t overfill with diff fluid.- Make sure you use the two tiny washers in between the gears on the output shafts.- Just make sure to let it set up on the threads for 15 minutes before installing the screws.- Tighten screws a little at a time in a cross pattern.do NOT over tighten when finally assembling as you will move the gears out of their proper position and it wont spin