Flysky FS-GT3B 2.4G 3CH AFHDS Radio Model Digital Propotional Radio Control RC System Gun Remote Control LCD Transmitter with FS-GR3E Receiver for RC Car Boat

Transmitter: Channels: 3 Mode type: car / boat RF range: 2.4-2.48GHz Band width: 500KHz Band: 160 RF power: less than 20dBm 2.4G system: AFHDS Modulation type: GFSK Sensitivity: 1024 Low voltage warning: yes (less than 9V) DSC port: 3.5mm (output: PPM) ST range: 90 degrees (L: 45, R: 45) TH range: 45 degrees (F: 30, B: 15) Charger port: yes Power: 12V Powered by: 8 * 1.5V AA batteries (not included) Display: LCD screen Weight: 395g / 13.9oz ANT length: 2.6cm / 1in Size: approx. 15.5 * 12.5 * 18.5cm / 6.1 * 4.9 * 7.2in Weight:397g Certificate:CE,FCC ID:N4ZFLYSKYGT3B Packing list: 1 * Transmitter 1 * Receiver 1 * Antenna tube 1 * Code matching line The transmitter and receiver have been pre-bound before delivery.if you are using another transmitter or receiver,follow the steps below to bind the transmitter and receiver. 1.Ensure you are using the AFHDS 2A protocol. 2.Insert the transmitter batteris. 3.Connect the bind cable to the receivers B/CH3 port. 4.Connect power to the receivers VCC port.the receivers LED should begin to flash indicating that it has entered bind code. 5.On the transmitter:Hold the bind button and toggle the transmitter power switch to its on position. if the receivers LED stops flashing then binding has been successful. 6.Let go of the transmitters bind button and remove the bind and power cable from the receiver. 7.Reconnect power to the receivers VCC port and test to make sure everything is working as expected.if not,repeat the steps above. Note: This binding information only applies to the FS-GT3B and FS-GR3E receiver,different receivers may require a different pocedure to complete the binding process.please vist the offical flysky website for the latest information on compatible receivers and their respective usermanuals